Ricoh Aficio 2090 freezes while printing?

[paulg]

Had one calling codes, rebooting and losing time once the drum shaft and earth cleaned up all was good again.
But like you say best to start with the drum and pro con senstive parts to see if they are ok.

[Anders Nilsson]

Hello i had a problem similar to your's and it turned out to be bad HDD's they are connected as an "assy" with to disks and depending on what file i was printing/copying it Froze in Copying,i tried Print /Copying /Document server.After new HDD assy it worke'd fine.

[dranoel]

You said you already replaced the hdd.Did you replaced both hdd.If not.Its a standard procedure when replacing hdd to replace both hdd.

[Oscar57]

Yes, I replaced both hard drives.

[dranoel]

Yes, I replaced both hard drives.

Can I know what is the version of your firmware.

[Oscar57]

Engine Firmware is 4.05
System/Copy Firmware is 1.04.4