Ricoh MPC5501 fuser

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • Athlontini
    Trusted Tech

    250+ Posts
    • Jun 2012
    • 269
    #16
    Re: Ricoh MPC5501 fuser

    Just had this issue last week too. Usually replacing the stripper plate solves the problem for me, but this time I had to take the springs on both ends of the stripper plate and forcibly wind them around an additional time for added pressure.

      Comment

      • Iowatech
        Not a service manager

        2,500+ Posts
        • Dec 2009
        • 3930
        #17
        Re: Ricoh MPC5501 fuser

        Originally posted by Hadster
        Thanks everyone for your help! I just find it hard to believe that I have to set the lead edge margin erase at 5mm to get color copies to go through. If that is the case... this fuser may last long, but sucks! I don't have this problem with the MPc28/3300 because it still uses a belt WITH oil lube!
        I'm pretty sure if you review the machine's factory specs you will find this less hard to believe.

          Comment

          Previous 1 2 template Next
          Working...