Hi all,
I have an issue with a DX3243 Jamming at the registration roller. It doesn't happen every time, but about every 2 to 10th time. The paper is fed to the registration roller, but the registration roller doesn't start to turn, the drum then does another rotation, and then the paper is either fed and goes through correctly, or the paper is fed a few centimeters and then jams.
I have replaced: all drum sensors, registration sensor, registration motor, feed clutch, paper feed rollers, main motor, main board and power supply.
I have an issue with a DX3243 Jamming at the registration roller. It doesn't happen every time, but about every 2 to 10th time. The paper is fed to the registration roller, but the registration roller doesn't start to turn, the drum then does another rotation, and then the paper is either fed and goes through correctly, or the paper is fed a few centimeters and then jams.
I have replaced: all drum sensors, registration sensor, registration motor, feed clutch, paper feed rollers, main motor, main board and power supply.