sc300 mp9000

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vargue
    Trusted Tech

    250+ Posts
    • Oct 2011
    • 404

    #1

    [Error Code] sc300 mp9000

    hi fellas today i have weird thread .machine make 6k then sc300 pops in screen evey time i clean corona wire and switch on it's worked about another 6k then electricity cut.nowadays we have electricity drop.and paper revealed black wide strip .i replaced p.p and cgp board . and same thread revealed again. any clue please.......................................
  • TonerMunkeh
    Professional Moron

    2,500+ Posts
    • Apr 2008
    • 3865

    #2
    Re: sc300 mp9000

    Replace the corona unit. The end blocks short out after a while causing this SC.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

    Comment

    • Tonerbomb
      AutoMajical Resolutionist

      Site Contributor
      2,500+ Posts
      • Feb 2005
      • 2589

      #3
      Re: sc300 mp9000

      Originally posted by TonerMunkeh
      Replace the corona unit. The end blocks short out after a while causing this SC.
      Bingo!!!!!!!!!!
      Mystic Crystal Revelations

      Comment

      • nikeccc
        Junior Member
        • Aug 2014
        • 5

        #4
        Re: sc300 mp9000

        Originally posted by vargue
        hi fellas today i have weird thread .machine make 6k then sc300 pops in screen evey time i clean corona wire and switch on it's worked about another 6k then electricity cut.nowadays we have electricity drop.and paper revealed black wide strip .i replaced p.p and cgp board . and same thread revealed again. any clue please.......................................
        SC300 Caused by Toner Leaks from the toner pump.

        Comment

        Working...