If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I tell in my earlier post that i replaced all boards including bicu from another machine but issue is same sc955
all boards of this machine working perfectly on another machine
On some bicu pcb's ther is an eprom you have to swap or it will code.
I have service manual of this machine and I want to inform I maintain 6 machines of mp1350 from 2008 and I also give services of different Ricoh models of color and black and white machines specially above 60 CPM machines. I join this forum not only for getting support I also want to give support, as you know that I join this forum from a year ago but I have some problems that why there is no any activity. So kindly don't take it personal.We have to share our experiences on this forum which supports all of us.Thanks
Did u find the problem mate, what was causing the SC955 on your m/c?
I am using MP1350 with external fiery controller model EB135, I am using this machine to print large jobs like 5000 to 8000 pages per job from last 3 months I am facing problem when I sent any job about 5000 to 8000 pages after completing 700 to 1500 pages machine engine runs but no paper feed out after 1 to 2 minutes machine generates SC955
SC 955 generates only on printing in copying machine is ok
Did u find out what was causing SC955 on your m/c mate??
Comment