problem with ricoh pro5100

[en.]

i have ricoh pro5100 it anew installation.... after i remove all shaping thing and lock as maintain in fsm manual

the device give me massage (( drawer unit setting error )

i checked all sensor and moter in )input &output check >>>every thing is right but the message not gone ?

[slimslob]

Re: problem with ricoh pro5100

Using SP 5803-001 through SP5803-081 is useless unless you know what all the VODKA ports are. SP5803-082 through SP5803-100 are the CPU ports and they do show what each bit is. I did not see the drawer unit listed in the CPU ports. Individuals sensors start at SP5803-101. Drawer unit sensors are SP5803-204 Lock Sensor, SP 5803-205 Set Sensor and SP5803-206 Knob Sensor. The set sensor is most likely knocked loose from its mount. Replacement and Adjustment, 4.7.9 DRAWER UNIT SET SENSOR. I hope this helps.

[sandmanmac]

Re: problem with ricoh pro5100

the device give me massage

I had no idea this was an available option! Anyone have the part number??
(Sorry...I couldn't resist)

[Tonerbomb]

Re: problem with ricoh pro5100

Are you positive that you didn't miss some of the packing material or tape somewhere?? I know that sounds stupid but it happens to everyone at sometime...also check the drawer latch system. These machines will only let you open the drawer unit when it wants to let you open it....