[Error Code] Ricoh 2035 error code 329

[nih]

Hi , there
I have this Ricoh 2035 which shows an error code 329 after pressing the copy button or start button.
When I give a copy command the code appears, and the print command is done.
When I give a command of say 10 copies the code will appear and then only the first page will be printed. I will need to turn off and on the machine again before I can do another 1 copy.
I have changed the laser Unit and the machine still behaves the same.
I am counting on you for further solutions.

Thanks

[sandmanmac]

Re: Ricoh 2035 error code 329

Am I right to assume that you did not do the Laser beam Pitch Data reset and then the 400 & 600 DPI Pitch adjustments in SP mode, which is VERY clearly stated in the manual?
These MUST be done after replacing the LD unit.

[slimslob]

Re: Ricoh 2035 error code 329

Am I right to assume that you did not do the Laser beam Pitch Data reset and then the 400 & 600 DPI Pitch adjustments in SP mode, which is VERY clearly stated in the manual?
These MUST be done after replacing the LD unit.

My guess is that either a clear all memory or clear engine memory was done without having printed SP mode list or backing up NVRAM. Pitch adjustment on the old laser unit probably would have corrected the error.