hi there. I have 2 units ricoh MP2510. my problem is the language on the SP Mode is Japanese language. have any idea to change the language to English. I have a problem to make a setting on it. hope someone can guide me. thnks.
-
-
Re: english language
Most Ricoh MFPs have at least 2 languages loaded, some of the newer models have more than 2. The language to be used can be toggled from User Tools. The upper right hand corner of the User Tools screen should be the toggle button. The button will be in the currently unused language. If the language you need is not shown, you will need to do a language firmware update and choose the 2 languages that you want on the machine. -
Re: english language
In my user tools language is english and france. The problem is my sp mode language is japanese. So i cant use my sp mode to make a setting coz i dont understand. is that because of firmware?
Hope so someone can help me to solve this problem. I dont have firmware for this machine.Comment
-
Re: english language
Machine State DFU Destination might be incorrect. Try SP 5996-001 Destination 0=Japan, 1=North America, 2=Europe, 3=Mainland China, 4=Taiwan.
Check the setting of DIP Switch 102 on the SBCU.
SBCU
SW102
Destination Bit
__________1__2___3___4
Japan>>> OFF OFF OFF OFF
NA >>>>>ON OFF OFF OFF
EU/ASIA >OFF ON OFF OFFLast edited by slimslob; 11-07-2014, 06:04 AM.Comment
Comment