PRO C900

[CrapAimer]

Hi all
don't know if anybody can help, cyan dev keeps pouring out the unit because the pin and spring which holds the white plastic seal in place funnily enough disappeared, looked in the parts manual but its not listed as one anyone else had this problem ? is there a mod avail ?

Regards
George

[rosspt]

Re: PRO C900

Got a picture? Page in the parts manual to get a better idea of where you're looking on the dev unit? Have had a few issues but need to know more to help you.

[CrapAimer]

Re: PRO C900

Will do but if you have emptied the developer its the part where the old dev comes out

[Gamut]

Re: PRO C900

Parts not available, you have to order complete unit! you can pull plastic tab forward and tape it.

I'd be more concerned as to where they disappeared to, if into dev unit they need to be removed or you will have replace anyway.

[rosspt]

Re: PRO C900

Parts not available, you have to order complete unit! you can pull plastic tab forward and tape it.

I'd be more concerned as to where they disappeared to, if into dev unit they need to be removed or you will have replace anyway.

Yes, I agree. the seal is part of the unit but if the seal is torn there's probably a reason why. You don't want to put a new unit in just to have the same thing happen.

[Tonerbomb]

Re: PRO C900

And those DV units are so reasonably priced.........................

[liffy]

Re: PRO C900

Swop the pin and spring from the developer fill inlet . Will save you cost of a new dev unit !!