This device is jamming at A, B, and C. Had to put a new pressure release roller on because it broke off. The paper goes through fuser unit not crinkled, the front edge of the paper gets in the junction gate and stops, then it tries to pull a second sheet of paper and it stops at the registration roller right at that sensor above the registration roller. Any advice would be appreciated. not sure if this is a sensor issue or what?? HELP?
-
-
Re: Savin C2525- Jamming
Look at your Jam Log for the Plotter to see what's throwing the code!
Should be SP7507 or thereabouts!
REACH FOR THE STARS!!!
Konica Minolta Planetariums!
https://www.konicaminolta.com/planet...gma/index.html -
Re: Savin C2525- Jamming
If you haven't done so already, make sure the paper size and orientation is correct.Comment
Comment