If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm having issues with a Gestetner DSC525 color printing and copier. Attached is a scan of an Auto Color Calibration Test Pattern. Thank you in advance for any help.
Definitely PCUs, replace them and you should be back in business. The ITB will usually give you a tracking image, that is 100% charge roller related so new PCUs will fix this
Definitely PCUs, replace them and you should be back in business. The ITB will usually give you a tracking image, that is 100% charge roller related so new PCUs will fix this
I don't see yellow or black in your picture, but to be safe I would go ahead and do the CMY. To check your black make an internal print like a counter page, if it's clean you're good to go.
Comment