[Error Code] ricoh spc232 error sc400

[BATA]

hello , i have ricoh color printer spc232 , it makes error code sc400 , please give me help

[rosspt]

Re: ricoh spc232 error sc400

TM sensor error
The CPU detected a low voltage of the positive reflection output under the
threshold in the TM sensor.
􀂃 TM sensors are dirty.
􀂃 A solid print out due to an electrostatic charging error
􀂃 The TM sensor is defective.
1. Clean the TM sensors.
2. Replace the TM sensors.
3. Check the image transfer unit.
4. Turn the power Off and On.


TM Sensor is the Toner Mark Sensor. This would be the first place I would look.