Ricoh 2501

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dewey206
    • May 2025
    #1

    [Misc] Ricoh 2501

    Last image output from machine is outputted on next copy from machine, only once.
    Tags: None
    • ruben
      The New Guy

      1,000+ Posts
      • Oct 2012
      • 1203
      #2
      Re: Ricoh 2501

      And?

        Comment

        • mikadonovan
          Senior Tech

          Site Contributor
          2,500+ Posts
          • May 2008
          • 2931
          #3
          Re: Ricoh 2501

          If it's a ghost image it may be time for a fuser rebuild. A little more info would be good.
          NEVER ASSUME ANYTHING

            Comment

            • slimslob
              Retired

              Site Contributor
              25,000+ Posts
              • May 2013
              • 36807
              #4
              Re: Ricoh 2501

              Offsetting with these machines can occur in the fusing unit and the PCU. The hot roller and the drum are very close in diameter. If there is a toner film built up on the hot roller it is time to rebuild the fusing unit. If it is past the recommended copy count for the PCU, replace it. Even if the PCU has not reached the recommended count for replacement, it could still need to be replaced if the machine gets very light usage. The cleaning blade will soften and not fully clean the drum.

                Comment

                Previous template Next
                Working...