ricoh mp2000L gdi "failed to print"message

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • neilt69
    TEAM WORKS
    • Jul 2008
    • 17
    #1

    ricoh mp2000L gdi "failed to print"message

    any ricoh eng'r. encountered this problem? machine is pinging in network but doesnt print at all. I tried using every driver for xp available ddst, pcl6, pcl5e even mini driver for mp2000 etc. upgraded gdi firmware but still doesnt work. Even i tried changing the gdi controller and bicu still problem exists. Can any ricoh expert give enlightenment on this matter. In usb it is working!!!
    Tags: failed to print, mp2000l, ricoh mp, usb
    • iMind
      Vacuum Cleaning Expert

      1,000+ Posts
      • Mar 2008
      • 1116
      #2
      Originally posted by neilt69
      any ricoh eng'r. encountered this problem? machine is pinging in network but doesnt print at all. I tried using every driver for xp available ddst, pcl6, pcl5e even mini driver for mp2000 etc. upgraded gdi firmware but still doesnt work. Even i tried changing the gdi controller and bicu still problem exists. Can any ricoh expert give enlightenment on this matter. In usb it is working!!!
      OK, you must run DDST driver from the CD, and you must change the driver port from 9100 to 10001, thats it.
      sigpicWe can all Win, but at the end we all loose. Save the greyhound

        Comment

        • neilt69
          TEAM WORKS
          • Jul 2008
          • 17
          #3
          salute U iMind, such a big big help problem was rectified Many Many Thanks

            Comment

            Previous template Next
            Working...