pro 900s SC161

[aaahmmm]

Dear all
I have pro 900s, I tried to move the LCT-MF but I forget to disconnect the connection cables so I damage the flat cable connector I switch on the machine and have SC 161-01 in the description of the error it is Connection between SBU and IPU is loose, broken, or defective
I am stuck and I cannot do jobs on the machine , can I disable the scanner and complete printing ,please help .

[Gary Bowen]

Re: pro 900s SC161

I believe what your asking is not possible. The C900S (D016) comes standard with LCIT/ARDF and is not configured to be disabled. You're going to have to order or repair the damaged harness(es).