ricoh 2035e dead machin

[sandmanmac]

Re: ricoh 2035e dead machin

Happy too hear you fixed it!!!!!!!!!!!!

Only for a day or so......
http://www.copytechnet.com/forums/ri...coh-2035e.html

[Tonerbomb]

Re: ricoh 2035e dead machin

the problem was not psu.. i just replaced relay sensor and machine turned on... funny solution that i found by chance

Happy too hear you fixed it!!!!!!!!!!!!

[hooman23]

Re: ricoh 2035e dead machin

the problem was not psu.. i just replaced relay sensor and machine turned on... funny solution that i found by chance

[Tonerbomb]

Re: ricoh 2035e dead machin

Hmmmm. How'dthey do dat?

AutoMajical resolution !!!!!!!!!!!!!!!!!!!!!!!!!!!

[wester]

Re: ricoh 2035e dead machin

A 2035 without any pcb...that's cool

Hmmmm. How'dthey do dat?

[Zaxxon]

Re: ricoh 2035e dead machin

thanks all.. i think the problem is psu. i found someone to repair the psu.... by the way my 2035 doesnt have pcb

A 2035 without any pcb...that's cool

[hooman23]

Re: ricoh 2035e dead machin

thanks all.. i think the problem is psu. i found someone to repair the psu.... by the way my 2035 doesnt have pcb

[Iowatech]

Re: ricoh 2035e dead machin

Check where the power cord goes into the back of the machine. Maybe try plugging the machine into a different wall socket.

[Tonerbomb]

Re: ricoh 2035e dead machin

(Taps playing in background) bury it!!!!!!!!!!!!!!!

[vargue]

Re: ricoh 2035e dead machin

hi controller pcb harness too dusty or unreachable.clean with akai or some thing .it's happened only in 2035s

[ruben]

Re: ricoh 2035e dead machin

From Goose's Guide:

B135/B138/B182/B183	DEAD MACHINE, NO OPERATION	[dead machine] - replace PSU
B135/B138/B182/B183	DEAD MACHINE, NO OPERATION	[dead machine] - replace BICU board
B135/B138/B182/B183	DEAD MACHINE, NO OPERATION	IOB to BICU ribbon cable not connected correctly
B135/B138/B182/B183	DEAD MACHINE, NO OPERATION	Shorted sensor - Photo reflection sensor AW010049
B135/B138/B182/B183	DEAD NO POWER	blown fuse 5 on copier power supply

[allan]

Re: ricoh 2035e dead machin

Start unplugging connectors for non crucial things like the fuser, or anything from the power supply and IO control that does not affect the controller from booting. Sounds like the supply is cutting out.

Could be anything.

If the problem, still persists swop out the supply if that does not work start swapping boards starting with the controler.

[hooman23]

my ricoh copier suddenly went off. and it does not turn on. when i tried to turn it on.it just blink less than one second. nothing happen after that... any suggestion?