If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Thanks man. You too! Funny there is no reference to it in the parts manual. That is why I tackled the replacement and adjustment section in the service manual hoping for a photo of sorts.
From what I could find it seems that the cover in your photo is part of the carriage (see the attached screenshot from the service manual).
Look at the photo on the right of the attached page - it seems pretty close.
Boy, that does look awfully similar. Thanks for the pic. The machine was placed into the field today, but I gotta go back next week to finish setting up the scanning. I'll look at it then. Have a good weekend!
We got a CW2200 in (not new) and this part, it's a cover for something, was included in the box. This is a long shot, but can anyone tell me where this goes? I only posted this after an exhaustive stroll through the parts catalog with no luck. 3D blows.
mikadonovan
From what I could find it seems that the cover in your photo is part of the carriage (see the attached screenshot from the service manual).
Look at the photo on the right of the attached page - it seems pretty close.
We got a CW2200 in (not new) and this part, it's a cover for something, was included in the box. This is a long shot, but can anyone tell me where this goes? I only posted this after an exhaustive stroll through the parts catalog with no luck. 3D blows.
Leave a comment: