Re: MP Pro c5100
Hi
I think you are right, I do find a lot of printers don't like gaffing with the fiery and all its options and the internal seems pretty good at getting the colours right. I did have one printer who went back to the internal on an older type machine as it was always better. I have ordered the Netware card for it, do you think that will do it?
Thanks
Tim
MP Pro c5100
Collapse
X
-
Re: MP Pro c5100
If it was set to 1 then your machine most likely came from Ricoh as a Fiery equipped unit..... That's what the Pro 5100 was intended to be for. It's a light production unit not an office unit like the c6502/c8002 units.Leave a comment:
-
Re: MP Pro c5100
Check SP5193-001.
It should be set to 0 to use the internal controller, 1 for the option external Fiery controllers.
The Fiery connects to the machine through a second NIC card, which will be right next to the standard NIC. (The secondary NIC is referred to as the Gigabit controller.)
Sounds like there is a chance that you have NO print controller. For your sake, I hope not.
Hi. You were right it was on 1 but putting it on 0 has not done it. Rebooted etc but no go so hopefully the netware card will do it. Thank you for the input tho.Leave a comment:
-
Re: MP Pro c5100
Check SP5193-001.
It should be set to 0 to use the internal controller, 1 for the option external Fiery controllers.
The Fiery connects to the machine through a second NIC card, which will be right next to the standard NIC. (The secondary NIC is referred to as the Gigabit controller.)
Sounds like there is a chance that you have NO print controller. For your sake, I hope not.Leave a comment:
-
Re: MP Pro c5100
If you order the card, you will be very sadly disappointed. It is simply an option for the internal (GW+) print controller.
And nobody uses NetWare anymore. I can't even remember the last time I saw it.Leave a comment:
-
Re: MP Pro c5100
This card is for NETWARE printing only........ The real way this machine is designed to print is with the Fiery E-22B or e-42B....
WHo does anything with netware anymore??????????????Last edited by Tonerbomb; 03-27-2015, 12:21 AM.Leave a comment:
-
-
Re: MP Pro c5100
Yep think your missing Netware printing type M2 (D719)Leave a comment:
-
-
-
-
Re: MP Pro c5100
It is an sp setting, can't remember which but it is more than one sp.Leave a comment:
-
MP Pro c5100
Hi
I have just got a new Pro C5100 delivered which had done around 300 copies which was great I thought until now I see there is no Printer on the control panel. Is there something I need to switch on in Service mode or is there an SD card I need for Network/Netware like an M2 card? I have checked user tools and there is no Printer there.
Thanks for any help
TimTags: None
Leave a comment: