C4000 void areas

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tinfox
    Trusted Tech

    Site Contributor
    250+ Posts
    • Nov 2007
    • 317
    #1

    C4000 void areas

    I can push in the duplexor while its printing and it will make a complete, but still light print. The duplexor doesn't seem to be bent in any way. This is going to be a parts machine, but I was just curious if anyone has seen this.
    test.jpg
    Tags: None
    • Zaxxon
      Senior Tech

      500+ Posts
      • Jan 2014
      • 608
      #2
      Re: C4000 void areas

      PTR guide broken.
      Please start you post with brand, model, problem.

        Comment

        • bob marley
          Service Manager

          1,000+ Posts
          • Jan 2012
          • 1339
          #3
          Re: C4000 void areas

          Originally posted by Zaxxon
          PTR guide broken.
          agree with u Zaxxon
          Live for yourself and you will live in vain. Live for others, and you will live again

            Comment

            • tinfox
              Trusted Tech

              Site Contributor
              250+ Posts
              • Nov 2007
              • 317
              #4
              Re: C4000 void areas

              Found the problem. For some reason it had a c3500 (or similar) PTR assembly. I swapped it for a c2800 assembly, now it prints great but buzzes like its shorting somewhere.

              Thanks for you help. :-)

                Comment

                Previous template Next
                Working...