Gestetner A045 / RW-240

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copypaste.gr
    #1

    Gestetner A045 / RW-240

    hi, my problem is that i can't open a PLT file in my Scantool when the PLT has created in Autocad 2007 or 8 or 9, is there any upgrade for my plotbase RW - 240?

    Please help somebody!
    Thanks!
    Tags: a045, gestetner, gig, rw240, sudden, tsc
    • schooltech
      School District Tech

      500+ Posts
      • Jun 2008
      • 504
      #2
      Did this just happen all of a sudden? And, do you have at least 1GB of RAM?

      I had problems with the RW240 software unless a gig of RAM was installed?

      Did you recently change any settings involving the PCI card or computer?

      I am not an expert with the wide-formats, but I have messed with the software a bit.

      I am not aware of any software upgrades that would allow it to work any differently.

      Also, make sure that the 'server' for where the software is running is relatively clean-any bloatware will eat into any resident RAM and will do stupid things with the software.

      Did you uninstall/reinstall anything?
      Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

        Comment

        • cobiray
          Passing Duplication Xpert

          1,000+ Posts
          • Mar 2008
          • 1199
          #3
          Plotbase software can be updated to version 3.7.1 for the RW240. It will provide expanded features for Autocad 2008 and is Windows Vista compatible. The newest version is on the TSC site under the wideformat section.
          the savin2535 is displaying well bet the hiter lamp is not shining and the lamp had been tested o.k.please kindly help.
          Samir: No, not again. I... why does it say paper jam when there is no paper jam? I swear to God, one of these days, I just kick this piece of shit out the window.
          Michael Bolton: You and me both, man. That thing is lucky I'm not armed.

            Comment

            • schooltech
              School District Tech

              500+ Posts
              • Jun 2008
              • 504
              #4
              I guess it helps when you have access to the TSC website.

              Losing access a while back makes it difficult sometimes. From what it sounds like, he may be having other problems. Of course, it never hurts to update anything to the latest-and-greatest.
              Bachelor of Science in Information Technology, Comptia A+, Comptia Network+

                Comment

                • Cipher
                  It's not easy being green

                  1,000+ Posts
                  • May 2006
                  • 1309
                  #5
                  I do not see PLT on the list of supported file formats.
                  Can they not export or convert to a supported format from AutoCAD?
                  • Knowledge not shared, is eventually knowledge that becomes lost... like tears in the rain.

                  Fully qualified technician for Ricoh - Canon - Sharp - HP - Brother

                    Comment

                    • Tonerbomb
                      AutoMajical Resolutionist

                      Site Contributor
                      2,500+ Posts
                      • Feb 2005
                      • 2589
                      #6
                      what about .dwg, tiff or pdf if they have PS. ?
                      Mystic Crystal Revelations

                        Comment

                        Previous template Next
                        Working...