mpc 2500 uneven color

[andantegirl]

need help
when i print block of color especially color with magenta or black element, it print darker color on the right side than the left side.
how can i fix this?

[JustManuals]

1- Open up yellow pages telephone book.
2- Look for Independent Copier Technicians / companies.
3- Call them up, make appointment.
4- Mix up a batch of margaritas so you'll be in fine form when the tech arrives.
5- Greet the technician, explain the problem, go back to drinking the margaritas.
6- When he is finished, thank him and pay him.
7- Go back to finishing up those margaritas.

HtH
Paul@justmanuals.com

[FRIDGEMAGNET]

[QUOTE=manuals4you;37308]1- Open up yellow pages telephone book.
2- Look for Independent Copier Technicians / companies.
3- Call them up, make appointment.
4- Mix up a batch of margaritas so you'll be in fine form when the tech arrives.
5- Greet the technician, explain the problem, go back to drinking the margaritas.
6- When he is finished, thank him and pay him.
7- Go back to finishing up those margaritas.

QUOTE]

Good advice Paul.

[andantegirl]

1- Open up yellow pages telephone book.
2- Look for Independent Copier Technicians / companies.
3- Call them up, make appointment.
4- Mix up a batch of margaritas so you'll be in fine form when the tech arrives.
5- Greet the technician, explain the problem, go back to drinking the margaritas.
6- When he is finished, thank him and pay him.
7- Go back to finishing up those margaritas.

HtH
Paul@justmanuals.com

good advice paul
unfortunately i can't do that in my country indonesia, since nobody even had that knowldege and maybe even ricoh technician can not fix this problem

[FRIDGEMAGNET]

good advice paul
unfortunately i can't do that in my country indonesia, since nobody even had that knowldege and maybe even ricoh technician can not fix this problem

There are 2 companies in Jakarta that are Ricoh recommended.
Modern Photo - ModernPhoto

http://setiawansedjati.com/

This is all standard stuff and they should be able to help.
Good luck.

[andantegirl]

There are 2 companies in Jakarta that are Ricoh recommended.
Modern Photo - ModernPhoto

http://setiawansedjati.com/

This is all standard stuff and they should be able to help.
Good luck.

thanks for the info
i bought this product from setiawansedjati 2 months ago, and i have told them the problem, but they stil can not solve the problem, probably i will contact modern photo

[Fearless V K]

The easiest thing to try is cleaning the laser slit glasses with the long brush inside the front door. there are four openings to slide it into (one for each color drum unit in the machine. If that doesn't work, you will most likely need to replace the drum and/or developer units for the colors in question. Also make sure the machine is level front to back, if it is not, developer can migrate to one end of the development units and cause a similar problem.

[lvsb]

Set SP 2914-1 and SP 2914-2 to 42

[Star]

Also, there was a firmware update on this.

"CAUSE:

Software bug: The laser optics shutter does not open correctly.

SOLUTION:

Production line

The engine firmware was modified to correct this symptom.

New version: V1.11.01"

I had this problem myself. Density was not even across page. Firmware
update fixed it.

Regards

[jctech]

jctechbr@gmail.com