MP 301 SPF SC 687

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lukeh
    Technician
    • Jun 2012
    • 43
    #1

    MP 301 SPF SC 687

    Tags: None
    • impetus73
      Technician

      50+ Posts
      • Mar 2012
      • 75
      #2
      Re: MP 301 SPF SC 687

      Probably the Controller board that is broken.

      Noise = electrical noise. Either induced electromagnetically, or power droppings, over voltage, signal noise on the power line, or a bad wire/solider point/connector.

      If it's constant every time you turn the machine on, it's probably not noise related.

        Comment

        • slimslob
          Retired

          Site Contributor
          25,000+ Posts
          • May 2013
          • 37628
          #3
          Re: MP 301 SPF SC 687

          Could be noise on the network.

            Comment

            Previous template Next
            Working...