Ricoh MP C5502. Fuser error after new install of sleave.

[Jammed]

Re: Ricoh MP C5502. Fuser error after new install of sleave.

Never say you're 100% if you're not 100%. It is 107

Okay. It's fixed. I found where the fuse goes. Put fuser back in. Code came back. Got into sim with "Yellow" 107 "Clear". I swear it would not let me in. I'm guessing the fuse blowing authorized the service mode.????.... Any who....long story. Finally got it reset and running. Thank for all the help!!

[Copierdocisleofman]

Re: Ricoh MP C5502. Fuser error after new install of sleave.

I agree with the people who say its yellow reset key 107 c key(not the C/stop key), 806182 is on the MPC3503 etc series not the MPC3502 series

[impetus73]

Re: Ricoh MP C5502. Fuser error after new install of sleave.

Press the yellow physical key, then 107, then press and hold the grey/brown C button for 4 seconds.

The fuse goes as shown in the pictures:

IMAG0582.jpgIMAG0583.jpg