sc 400 on ricoh MP-C2800

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wangyuruiz
    Junior Member
    • Jun 2015
    • 3
    #1

    [Error Code] sc 400 on ricoh MP-C2800

    hi guys... I am not an expert ricoh machine technician.I need your help regarding the sc 400 error on my MP-C2800..
    I already cleaned the ID sensor unit & ITB. The issue is after printing/copying a document the sc 400 error appears.
    So I will turn Off the machine then ON,error disappear. after printing again error appears.
    Tags: None
    • slimslob
      Retired

      Site Contributor
      25,000+ Posts
      • May 2013
      • 36994
      #2

        Comment

        • wangyuruiz
          Junior Member
          • Jun 2015
          • 3
          #3
          Re: sc 400 on ricoh MP-C2800

          Thank you slimslob, I will try to check it today..I guess the sensors we're damaged as I was using a contact cleaner in cleaning them.

            Comment

            • wangyuruiz
              Junior Member
              • Jun 2015
              • 3
              #4
              Re: sc 400 on ricoh MP-C2800

              replaced the ID sensor board, machine now working fine...

                Comment

                • Iowatech
                  Not a service manager

                  2,500+ Posts
                  • Dec 2009
                  • 3930
                  #5
                  Re: sc 400 on ricoh MP-C2800

                  Originally posted by wangyuruiz
                  replaced the ID sensor board, machine now working fine...
                  Thanks for letting us know!

                    Comment

                    Previous template Next
                    Working...