MPC 3002 Problem

[gnr115]

Hello

Sometimes appear in print marks the last impression that the equipment had done. Have tested the blade cleaning the transfer belt .
I have example

Does anyone have any idea what might be
Thanks

[Zaxxon]

Re: MPC 3002 Problem

Hello

Sometimes appear in print marks the last impression that the equipment had done. Have tested the blade cleaning the transfer belt .
I have example

Does anyone have any idea what might be
Thanks

9 of 10 on this model is fusing belt error, guess this is the problem here too.

[bob marley]

Re: MPC 3002 Problem

9 of 10 on this model is fusing belt error, guess this is the problem here too.

agree with u

[logrady2331]

Re: MPC 3002 Problem

It can only be two things: PCU or fuser. If it
was transfer it would be on the back also. Fuser all day long.

[Debs1964]

Re: MPC 3002 Problem

I agree with everyone else, it will be the fusing sleeve, the second page you linked to looks like a confidential document, I would delete it if I were you

[imaginemoko]

Re: MPC 3002 Problem

fuser sleeve replacement its common for this model...

[gnr115]

Re: MPC 3002 Problem

thank you, all