Mp 2851 giving an sc220 code

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jeffjazzy
    Technician

    Site Contributor
    • Aug 2011
    • 18

    #1

    Mp 2851 giving an sc220 code

    I'm looking for some help with an sc220 laser sync detect problem.
    The copier will sometime jam going into the registration area. JC014 It's producing partial
    image On the copies as well. I inspected the LD unit and nothing seemed out of the way with it.
    I didn't pay too much attention at first but the copier sounds like it's laboring when the main
    motor is turning. I did the pm to it but that didn't help very much.
    Appreciate any help.
    Thanks
  • slimslob
    Retired

    Site Contributor
    25,000+ Posts
    • May 2013
    • 36871

    #2
    Re: Mp 2851 giving an sc220 code

    From Goose's Guide:

    D084/D085 SC 220 Laser sync detection error: Laser Sync Detection Harness loose or defective
    D084/D085 SC 220 Laser sync detection error: Laser sync detection board defective
    D084/D085 SC 220 Laser sync detection error:: LDB Unit Defective
    D084/D085 SC 220 Laser sync detection error: IPU Defective
    Physical inspection of a Laser Diode Unit usually will detect a defective unit.

    Comment

    • redneckstylin
      Trusted Tech

      100+ Posts
      • Sep 2011
      • 173

      #3
      Re: Mp 2851 giving an sc220 code

      make sure your nvram is sitting correctly

      Comment

      • redneckstylin
        Trusted Tech

        100+ Posts
        • Sep 2011
        • 173

        #4
        Re: Mp 2851 giving an sc220 code

        They are spider chips with half moon im sure half moon at top if not it will show a sc220 !

        Comment

        • Debs1964
          Service Manager

          1,000+ Posts
          • Oct 2010
          • 1687

          #5
          Re: Mp 2851 giving an sc220 code

          My memory may be failing me, but I think front cover switches can cause this problem, of course I may be remembering wrong...I blame my age
          There are 10 types of people in this world, those who understand binary maths and those who don't

          Comment

          • slimslob
            Retired

            Site Contributor
            25,000+ Posts
            • May 2013
            • 36871

            #6
            Re: Mp 2851 giving an sc220 code

            Originally posted by Debs1964
            My memory may be failing me, but I think front cover switches can cause this problem, of course I may be remembering wrong...I blame my age
            I know that the old 1035s and 1045s could SC22X codes from a bad door switch.

            Comment

            • gear13z
              Technician

              50+ Posts
              • Sep 2011
              • 68

              #7
              Re: Mp 2851 giving an sc220 code

              try to change your polygon motor.
              .....with all it shams, drudgery, and broken dreams, it is still a beautiful world.....

              Comment

              Working...