Need HDD image files for a SL-X4300LX

[Phil B.]

Re: Need HDD image files for a SL-X4300LX

hi ,


Any one can give me below file for Samsung MFP. CLX 7500


-unix script files x 2
-HDD image file x 1

stop hyjacking threads with a different mode;#
start your own thread

[rrrohan]

Re: Need HDD image files for a SL-X4300LX

kinda curious what the Unix script files are because ive never had them and ive recovered atleast 10 samsung drives with just the .ehd file

[Mitch Barron]

[rrrohan]

Re: Need HDD image files for a SL-X4300LX

are you referring to the fact KM firmware is no longer a single .tar file?

[Mitch Barron]

Re: Need HDD image files for a SL-X4300LX

No what I am saying is that is only one simple file, and not two as before, the unix and the images files, so now is all combine in one simple file.

[rrrohan]

Re: Need HDD image files for a SL-X4300LX

No what I am saying is that is only one simple file, and not two as before, the unix and the images files, so now is all combine in one simple file.

oh you mentioned Konica so wasnt sure

[Jack79]

Re: Need HDD image files for a SL-X4300LX

I have never seen unix scripts to recover hdd. I always do the job with one file. Maybe as someone mentioned scripts were required for the first version of recovery file.

[sfel]

Re: Need HDD image files for a SL-X4300LX

Hello,

i am trying to peform a system recovery SL-M4583fx and do not have any files. Can someone help me and tell, which file is the correct one for a recovery on that model and where i can get this file?

best regards

[Arcadian]

Re: Need HDD image files for a SL-X4300LX

Hello,

i am trying to peform a system recovery SL-M4583fx and do not have any files. Can someone help me and tell, which file is the correct one for a recovery on that model and where i can get this file?

best regards

I dont think there is a recovery image for the 4583, just put in a working non formatted drive over 160gb, it should boot up, you might have a main board issue or a bad ope panel.

[vigour]

Re: Need HDD image files for a SL-X4300LX

I dont think there is a recovery image for the 4583, just put in a working non formatted drive over 160gb, it should boot up, you might have a main board issue or a bad ope panel.

How does that work.
I checked online and 4583 looks exactly like 4580. The specs say 320 gig hard drive like all other Samsungs.
I have never been able to get a Samsung to work on a drive smaller than 320 gig
Firmware looks similar to 4580
Samsung ProXpress SL-M4583 Laser Multifunction Printer series Software and Driver Downloads | HP(R) Customer Support

IT seems to be basically the same machine so the hard drived recovery and firmware process should be the same

[sfel]

Re: Need HDD image files for a SL-X4300LX

I dont think there is a recovery image for the 4583, just put in a working non formatted drive over 160gb, it should boot up, you might have a main board issue or a bad ope panel.

Thank you for your reply.

How do i prepare such a HDD. I tried to put another non-formatted drive in, but it do not boot up. I tried zto use the repair function but the printer chrashes and lead me to the tech mode again.

Shouldn't there be any data on the HDD ?

I have tried with a 500 GB HDD and the same HDD (320) which was in before after i have cleaned it using diskpart.

[vigour]

Re: Need HDD image files for a SL-X4300LX

YouTube

It only works with 320 GB drives for me.

Sent from my SM-G950U using Tapatalk

[Arcadian]

Re: Need HDD image files for a SL-X4300LX

Thank you for your reply.

How do i prepare such a HDD. I tried to put another non-formatted drive in, but it do not boot up. I tried zto use the repair function but the printer chrashes and lead me to the tech mode again.

Shouldn't there be any data on the HDD ?

I have tried with a 500 GB HDD and the same HDD (320) which was in before after i have cleaned it using diskpart.

So Sorry there is a File for the drive, I can send you a link, Send me a PM. Ill forward the link. You need to extract it to a USB drive then do the recovery.

also it has to be 320 GB just dont use a toshiba drive.

[rrrohan]

Re: Need HDD image files for a SL-X4300LX

So Sorry there is a File for the drive, I can send you a link, Send me a PM. Ill forward the link. You need to extract it to a USB drive then do the recovery.

also it has to be 320 GB just dont use a toshiba drive.

I've recently used a 500gb ok since finding 320 is hard these days

[Arcadian]

Re: Need HDD image files for a SL-X4300LX

I've recently used a 500gb ok since finding 320 is hard these days

WELL ITS HAS TO BE OVER 320GB so to say

with that said, you want the link?

i want to try a ssd drive since they are getting cheaper have not tried one yet, but it is interesting.