Color registration issue Samsung CLP-775ND

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vimann
    • Dec 2024

    Color registration issue Samsung CLP-775ND

    Hello. I recently bought a refurb a Samsung CP-775ND
    Color registration is slightly off at the left side (about 30% of the page).
    Printer sits on a perfectly level surface, ran auto color registration multiple times, but no changes.
    What should I try next, what could be the culprit?
  • George J
    Trusted Tech

    100+ Posts
    • Nov 2010
    • 107

    #2
    Re: Color registration issue Samsung CLP-775ND

    I had a couple of faulty transfer units where one of the rollers fell into the unit because the plastic holder broke. Check and / or replace the transfer unit.

    Comment

    • vimann

      #3
      Re: Color registration issue Samsung CLP-775ND

      Thank you for your reply, replaced the transfer belt but the problem didn't go away.

      Comment

      • Arcadian
        Trusted Tech
        • Feb 2010
        • 218

        #4
        Re: Color registration issue Samsung CLP-775ND

        Possibly you have a bad LSU unit, have you tried changing the cartridge?? using third party cartridge is a NO NO for the 775 even though they might work. but Try changing the cartridge with another yellow and see if the problem, persist.




        Originally posted by vimann
        Thank you for your reply, replaced the transfer belt but the problem didn't go away.

        Comment

        • vimann

          #5
          Re: Color registration issue Samsung CLP-775ND

          Originally posted by Arcadian
          Possibly you have a bad LSU unit, have you tried changing the cartridge?? using third party cartridge is a NO NO for the 775 even though they might work. but Try changing the cartridge with another yellow and see if the problem, persist.
          Thanks for the reply.
          Toners were original, almost new and the defect presented itself on regardless of color in exactly the same way and exactly the same area.
          Wasted a day fiddling with manual registration and still there were no improvements.
          Bad LSU was my conclusion as well and got rid of the printer.

          Comment

          Working...