SCX-8040

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tr210907
    Technician
    • Jul 2011
    • 40
    #1

    SCX-8040

    We are solely Sharp Dealer but had a Samsung SCX-8040 donated. So we past along the gift to a local small church with the agreement they can have for free but we would be unable to put it under maintenance contract. Long story short we installed a Sharp for them last week and he had me look at the Sami we donated years ago. Its combined meter is just over 10K colors are ok but the Black looks like what you would get when a Sharp starts to pull DV. (Tiger Stripes). My question: Is there a simulation to run to correct this or will replacing part number MLT-R607K be the solution. If do need to replace Imaging unit. What adjustments should be run? I appreciate any and all feedback.
    Tags: donated, pull, run, scx-8040, sharp
    • tr210907
      Technician
      • Jul 2011
      • 40
      #2
      Re: SCX-8040

      Originally posted by tr210907
      We are solely Sharp Dealer but had a Samsung SCX-8040 donated. So we past along the gift to a local small church with the agreement they can have for free but we would be unable to put it under maintenance contract. Long story short we installed a Sharp for them last week and he had me look at the Sami we donated years ago. Its combined meter is just over 10K colors are ok but the Black looks like what you would get when a Sharp starts to pull DV. (Tiger Stripes). My question: Is there a simulation to run to correct this or will replacing part number MLT-R607K be the solution. If do need to replace Imaging unit. What adjustments should be run? I appreciate any and all feedback.

        Comment

        • Phil B.
          Field Supervisor

          10,000+ Posts
          • Jul 2016
          • 22798
          #3
          Re: SCX-8040

          personally (seems to be the same opinion here) SAMSUX are shit products... the boss got the dealership DESPITE mine and the GM suggestions.

          the products are shit
          the tech support is shit
          the website and operations are shit
          the parts/returns policy are shit.

          guess that's why the HP lines using the SAMSUX engines are shit


          get the idea?


          run forest run!

            Comment

            • Arcadian
              Trusted Tech
              • Feb 2010
              • 218
              #4
              Re: SCX-8040

              Originally posted by tr210907
              We are solely Sharp Dealer but had a Samsung SCX-8040 donated. So we past along the gift to a local small church with the agreement they can have for free but we would be unable to put it under maintenance contract. Long story short we installed a Sharp for them last week and he had me look at the Sami we donated years ago. Its combined meter is just over 10K colors are ok but the Black looks like what you would get when a Sharp starts to pull DV. (Tiger Stripes). My question: Is there a simulation to run to correct this or will replacing part number MLT-R607K be the solution. If do need to replace Imaging unit. What adjustments should be run? I appreciate any and all feedback.

              it is the imaging unit. or high voltage power supply, might want to check the psu as the caps my explode

                Comment

                • tr210907
                  Technician
                  • Jul 2011
                  • 40
                  #5
                  Re: SCX-8040

                  Originally posted by Arcadian
                  it is the imaging unit. or high voltage power supply, might want to check the psu as the caps my explode
                  Thank you for your input. Any simulations that should be ran after replacing the unit? Or will it detect new unit and do everything on its own? Thanks again..

                    Comment

                    • Arcadian
                      Trusted Tech
                      • Feb 2010
                      • 218
                      #6
                      Re: SCX-8040

                      Originally posted by tr210907
                      Thank you for your input. Any simulations that should be ran after replacing the unit? Or will it detect new unit and do everything on its own? Thanks again..
                      Nothing to run no test just check if it prints.

                        Comment

                        Previous template Next
                        Working...