The printer has only USB (no WIFI, no ethernet RJ-45 port) and this error means:
Any idea what is wrong? Formater board? Or any other idea?
Printer do not want to print with this error.
I have answer: A3-3311Error #A3-3311Connection with the SMTP server failed.
Check the server settings and the network cable.
Call for service
Temperature sensor has some problem.
1. Turn the power button off and on.
2.Check the output of the temp. sensor.
3. Replace the main board.
Do you have any idea where is temperature sensor located (except fuser)? At the main board (formater)?
- Error #A3-3311
- Description: Connection with the SMTP server failed.
- Remedy: Check the server settings and the network cable.
Any idea what is wrong? Formater board? Or any other idea?
Printer do not want to print with this error.
I have answer: A3-3311Error #A3-3311Connection with the SMTP server failed.
Check the server settings and the network cable.
Call for service
Temperature sensor has some problem.
1. Turn the power button off and on.
2.Check the output of the temp. sensor.
3. Replace the main board.
Do you have any idea where is temperature sensor located (except fuser)? At the main board (formater)?
Comment