Samsung SCX 4200/4300

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • KHAN
    Trusted Tech
    • Aug 2006
    • 261

    #1

    Samsung SCX 4200/4300

    Hello friends,
    I need the Firmware of Samsung SCX 4200 and SCX 4300.
    From where i can get this software?
    My SCX 4200 shows ERROR TONER EMPTY, I want to solve this with out changing the new CARTRIDGE, PLEASE need help.
    THANKS GOOD DAY.
  • gordie
    Technician

    50+ Posts
    • May 2008
    • 83

    #2
    Hi This is not a frimware fault. On some machines you can reset the cartridge in the tech mode. or you could do a ram clear. but it will not last long as there will only be a little bit toner left.

    Gordie
    sigpic

    Comment

    • KHAN
      Trusted Tech
      • Aug 2006
      • 261

      #3
      Thanks sir,can you help me I want to reset this ERROR with out changing the Toner Cartridge,
      THANKS.

      Comment

      • OMD-227

        #4
        Oh dear........

        empty toner, means empty toner mate. No firmware, software or reset will change that fact. New cartridge required. The machine will detect that the cartridge is empty.

        Holy cow!

        Comment

        • Vista Tech
          Trusted Tech

          100+ Posts
          • Apr 2008
          • 116

          #5
          On these machines you can get into the tech mode and turn off the toner warning light. If you do that you MUST remember that you did so and when the customer starts getting light copies don't freak out and start replacing boards.

          Comment

          Working...