[Error Code] samsung ml 1640 SEE cartridge problem

[DRAGIC]

I have a problem with samsung ml 1640.After changing a cartidge,printer gives me an error light.I was printed test page on the printer and it tells me that the toner is invalid,but,I put an genuine samsung cartidge mlt-108 in the printer.I tried to update firmware from samsung site,and i download and upgrade to newiest firmware for ml 1640.But nothing happened with the printer.I still have an error light because of invalid cartridge.Does anyone have a solution for this problem?
Thank you

[tonerspot]

toner light is blinking or steady,you can fix your printer to no need chip anymore

[DRAGIC]

Toner light is off,no blinking or lighting.I upgraded firmware to new one from the samsung site.Did this is bad for chip crossover?
Because,i tried to turn of CN 5 switch and i put in the printer starter cartridge.I find a ml 1640 firmware fix on the internet,but when i started setup,after 7-8 seconds,redy light on the printer start blinking in red and orange color.But nothing happens.I was waiting for something to happens,but after 5 minutes,nothing happened.Is the problem with firmware,because the fix firmware is older than the firmware which i was installed on the printer.After that,i turn off the printer and turn on .But I got the same error.Can you help me?