We are a small shop and just got our first mx-m363n used.
The keyboard has three geen leds that flash when a key is pressed and it is pulled out, the cables seem to be all connected.
There does not seem to be anything in user settings or service mode that i can find to toggle its operation.
I have tried entry in different screens where the soft keyboard works fine.
The keyboard has three geen leds that flash when a key is pressed and it is pulled out, the cables seem to be all connected.
There does not seem to be anything in user settings or service mode that i can find to toggle its operation.
I have tried entry in different screens where the soft keyboard works fine.