Afternoon collective,
I have one of these continuously rebooting. Originally, it was freezing whenever a few jobs were sent to it. It was freezing even when trying to print config pages etc. I have changed to many drivers, and all are having the same issue. Bear in mind, this was only happening when plugged into the network, hence, thinking there was a job stuck in the queue etc. I resorted to changing the main pwb (intergrated NIC), but this didn't work. I upgraded the firmware, and now when jobs are sent, it reboots! I can finally print config pages, but users get greeted with a snap and the whirring of a reboot.
I've asked other engineers on my team, and the best they have come up with is jobs stuck in the queue. Any help from you guys would be much apprieciated.
Thanks
I have one of these continuously rebooting. Originally, it was freezing whenever a few jobs were sent to it. It was freezing even when trying to print config pages etc. I have changed to many drivers, and all are having the same issue. Bear in mind, this was only happening when plugged into the network, hence, thinking there was a job stuck in the queue etc. I resorted to changing the main pwb (intergrated NIC), but this didn't work. I upgraded the firmware, and now when jobs are sent, it reboots! I can finally print config pages, but users get greeted with a snap and the whirring of a reboot.
I've asked other engineers on my team, and the best they have come up with is jobs stuck in the queue. Any help from you guys would be much apprieciated.
Thanks