[Jamming] CLX-9251 "Jam inside machine"

[CBSUSER]

Title says error given, but the error code is M2-3113, on looking at it seems that it has to do with tray 2, cant find any issue, nor does diagnostics indicate that a sensor is failing, anyone that works on samsungs point me in the right direction?
sorry thats c9251 btw.

[g.jacks@alphacopy.com.au]

Re: CLX-9251 "Jam inside machine"

Title says error given, but the error code is M2-3113, on looking at it seems that it has to do with tray 2, cant find any issue, nor does diagnostics indicate that a sensor is failing, anyone that works on samsungs point me in the right direction?
sorry thats c9251 btw.

I cannot find a 3113 error that starts with M2.

A3-3113 Sensor Failure: #A3-3113 (thermostor)
U2-3113 Magenta LSU Failure: #U2-3113
U3-3113 in the manual also reads as a Feed in jam under the scanner section.

No M2 though

[Arcadian]

Re: CLX-9251 "Jam inside machine"

Title says error given, but the error code is M2-3113, on looking at it seems that it has to do with tray 2, cant find any issue, nor does diagnostics indicate that a sensor is failing, anyone that works on samsungs point me in the right direction?
sorry thats c9251 btw.

you have a stuck or broken flag somewhere I would look at the door where the paper path goes, or exit area. flags get knocked out of position and cause this error I also had toner clog the photosensor so a good can of air would help on the photo sensors..