Samsung SL-C460 resets

[1stcavvet]

I had to replace the transfer belt and fuser in this machine, how do you reset fuser counter and transfer belt counter THANK YOU

[Fido1970]

Re: Samsung SL-C460 resets

Manual:
1. Enter in Tech Mode
2. Tech Mode>Tech Menu>OK>Data Setup>Clear Counts
3. Enter passcode: 1934
4. You can reset: imaging unit, fuser, transfer belt, roller....

[1stcavvet]

Re: Samsung SL-C460 resets

Thank you very much, When you say enter tech mode do you mean in the maintinance section? how do you get to tech mode? thanks again

[Fido1970]

Re: Samsung SL-C460 resets

Ah , I forgot the most important thing Tech Mode sequence keys:
Menu>Back>Left>Right>OK>Stop/Clear>Menu

Good Luck!

[1stcavvet]

Re: Samsung SL-C460 resets

thanks again for all your help

[1stcavvet]

Re: Samsung SL-C460 resets

I tried to reset the fuser and tranfer assy ---menu,back,left,right,ok,stop/clear,menu doesn't get me in. is that the right sequence? am I outa order? please let me know

[Fido1970]

Re: Samsung SL-C460 resets

Sequence is correct, but You need enter it not too slow and not too fast Try again and good luck!

[1stcavvet]

Re: Samsung SL-C460 resets

thanks, I just knew it had to be my fault LOL

[alejandra2016]

Re: Samsung SL-C460 resets

thanks, I just knew it had to be my fault LOL

Hello! I have a Samsung Xpress C460W and I would like to know if this procedure will reset the page counter too.
My printer says I'm running out of toner and I need to know if I reset it, I will be able to continuing printing.
I thank you all in advance for your great help!

Alejandra.

[1stcavvet]

Re: Samsung SL-C460 resets

you need to install a new toner, automatic reset

[akmodan]

Re: Samsung SL-C460 resets

I still have 10% of toner. I think its not fair to exchange a toner I have not used like Yellow since I have Used only Black. I dont understand why the toner count even when its not used.

Is it possible to reset it or change the configuration to use the toner longer until the end? Thanks!

[1stcavvet]

Re: Samsung SL-C460 resets

no you can't reset , the color toner uses a little to calibrate and initialize every time its turned on that's how it eventually gets depleated

[eliaso]

Re: Samsung SL-C460 resets

hello, I did not found how to go to thech mode

[eliaso]

Re: Samsung SL-C460 resets

I found the solution
it need to change the resistance 56 ohm on the drum unit

[tony10x]

Re: Samsung SL-C460 resets

Does this same direction apply to my Samsung c460fw printer .. I too have installed a new belt and my printer says prepare new belt and replace fuser soon.

I went thru the reset sequence but was unable to find or access tech mode ??

Thanks