I just replaced the Image Transfer Belt on my CLP-360 but it still says it needs to be replaced, I need to know how to get into Tech Mode and Reset that counter.
Thanks in advanced
Thanks in advanced
-
-
Re: Samsung CLP-360 Series - Tech Mode
From what I can see there isn't a screen on the CLP-360 and so I don't think there's a way to enter 'service mode' as such. Odd because you should be able to reset the counters somehow..
Only thing I can offer is seeing if a fresh firmware install will sort it out (V3.00.02.17 is the latest as of May 26 2015).
I think I've had issues with these 'screenless' Samsung desktop printers before -- no way to do proper service operations and such like. -
Re: Samsung CLP-360 Series - Tech Mode
Correct, There is no screen, but you should still be able to get to Tech/Service Mode, I know other brands, like HP for instance, will print out the Menu and you can navigate using the buttons and the LEDs on the panel.Comment
-
Re: Samsung CLP-360 Series - Tech Mode
I think you're right - but can't seem to find anything in the service manual
However there are some things you can do with advanced settings on Easy Printer Manager plus also something called EDC
- SVC_Manual_CLP-36x_troubleshooting_admin.pdf
- CLP-310_315 error log print tool.pdf
- Printer-Event-Log-v01.zip
hope this helps!Comment
-
Re: Samsung CLP-360 Series - Tech Mode
In Samsung CLP-360 Manual the solution of removing this annoying message from is hard reset of your printer.
Comment
-
Re: Samsung CLP-360 Series - Tech Mode
Reset e Fix error Transer Belt and Other Drum etc .....Work .....Samsung CLP 365 Full reset - printerservisComment
Comment