Samsung 9250ND shifted color

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • thomfish
    Trusted Tech
    • Jul 2014
    • 101
    #1

    Samsung 9250ND shifted color

    Hello

    Samsung 9250nd prints colour documents shifted. It looks like yellow toner is a bit shifted and gives 3D effect.
    Can you help me solve this problem please?
    Attached pictures show the problem

    Also image is a bit skewed.

    I have done color calibration and replaced ITB but it did not help.

    Thanks in advance

    IMG_0876.jpgIMG_0887.jpgIMG_0889.JPG
    Tags: None
    • thomfish
      Trusted Tech
      • Jul 2014
      • 101
      #2
      Re: Samsung 9250ND shifted color

      Hello I am really not sure where is the problem. I count on your help. Colors are shifted. Is it any method to adjust them?
      Ii swap Transfer Belt from working machine but it does not help. Color registration and color calibration does not make any difference.
      I scanned the same document to USB and this is fine.
      What should I check or replace? Can it be LSU issue?
      I attached another picture.

      Samsung9250shifted colors.jpg

        Comment

        • Dan_Gardner
          #3
          Re: Samsung 9250ND shifted color

          I'd clean the ID sensor array first if you haven't already done so.

          If not it looks like an LSU failure or ID sensor failure to me (more likely to be the LSU).

            Comment

            Previous template Next
            Working...