L4-06 on MX4101N

[mutumoja]

Primary transfer belt lift motor trouble has me stumped. machine has done a bunch of miles but seems a bit intermittant with this error. swapped out belt units and replaced clutches but still happens intermittantly. Thought i was onto something when i found the K flywheel was missing and had been for a few yrs (before my time so i'm not taking the blame for that one "mr musicman")

Any ideas?

Thanks
Mutumoja downunder

[drowranger]

Re: L4-06 on MX4101N

check if the 2 sensors detecting transfer belt lift op are working and clean. there was few mods for the tud_k & tud_cl sensors may be changing it will fix it.(pg46 item53)

[mutumoja]

Re: L4-06 on MX4101N

Checked sensors all ok problem was a broken lead to the sensor a bit bizarre but there you have it thanks anyway