Hello everyone,
I'm dealing with a jam code FPNCH on an MX6200 with MXFN4 finisher. If I disable the punch in admin mode it work fine. We've changed the 2 board that detect the size of paper passing, the 2 sensors for punch rotation and the finisher main brd. I'm suspecting that this is not related to punch and it could be timing with the rest of the finisher. The unit as around 1.5 millions copies and the firmware is latest
I'm dealing with a jam code FPNCH on an MX6200 with MXFN4 finisher. If I disable the punch in admin mode it work fine. We've changed the 2 board that detect the size of paper passing, the 2 sensors for punch rotation and the finisher main brd. I'm suspecting that this is not related to punch and it could be timing with the rest of the finisher. The unit as around 1.5 millions copies and the firmware is latest
Comment