MX MLC12 LCC_ERR

[hosbiz]

I'm having problems with LCC for MX M1054. Frequent jamming due to lcc_err when im checking Jam history. Any Help?

[spanky]

Re: MX MLC12 LCC_ERR

See attached bulletin

[Ceechtay]

Re: MX MLC12 LCC_ERR

I assume you are referring to the MX-LC12.

I would check/replace the torque limiter (suggested life of 800k) and/or the paper feed clutch and transport feed clutch.

If there aren't a lot of miles on these components, there is some special firmware to address this issue. PM me and I will try to get it to you.

[Michmich123]

Re: MX MLC12 LCC_ERR

I'm having problems with LCC for MX M1054. Frequent jamming due to lcc_err when im checking Jam history. Any Help?

Hey there ,

this is a Problem with the Firmware.
There is an lc12 Or Enginefirmware in the Download-section .
contact an local Dealer Or supporter .