MX2610 polished grooves on mag roller

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mttech
    Trusted Tech

    100+ Posts
    • Mar 2014
    • 127
    #1

    MX2610 polished grooves on mag roller

    About three weeks back I got a call for poor black quality on an MX2610. There were polished grooves on the mag roller. Replaced black DV unit, DV, drum and MC unit. Now the grooves have returned. I'm not making any sense out of this one. Colors are all fine. Really don't want to just throw another DV unit and bag of DV at the problem. Has anybody else seen this?20160401_151248.jpg20160401_150933.jpg
    Tags: None
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3374
      #2
      Re: MX2610 polished grooves on mag roller

      Originally posted by mttech
      About three weeks back I got a call for poor black quality on an MX2610. There were polished grooves on the mag roller. Replaced black DV unit, DV, drum and MC unit. Now the grooves have returned. I'm not making any sense out of this one. Colors are all fine. Really don't want to just throw another DV unit and bag of DV at the problem. Has anybody else seen this?[ATTACH=CONFIG]32410[/ATTACH][ATTACH=CONFIG]32411[/ATTACH]
      I have seen this, but am not certain that toner 'rocks' caught in the doctor blade cause this. Pull your black toner cartridge out and give it a shake - if it rattles, you found the problem.
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • banginbishop
          grumpy old git

          500+ Posts
          • Oct 2007
          • 894
          #3
          Re: MX2610 polished grooves on mag roller

          I'd also replace the drum unit a complete unit & not just a rebuild either - also is it OEM toner?
          Incontinentia Buttocks

            Comment

            • mttech
              Trusted Tech

              100+ Posts
              • Mar 2014
              • 127
              #4
              Re: MX2610 polished grooves on mag roller

              Thanks for the replies. Toner rocks make perfect sense. Also, all supplies are OEM. I will try suggestions and see where that leads.

                Comment

                • mttech
                  Trusted Tech

                  100+ Posts
                  • Mar 2014
                  • 127
                  #5
                  Re: MX2610 polished grooves on mag roller

                  Just an update. Replaced black toner, DV unit and DV. After 2 weeks still looks good. Couldn't hear anything unusual when toner cartridge was shaken, but if slowly tilted you could hear some funny noises. The other tech likened it to a rainstick. Thanks for putting me back on the right path. Just one of those days I was trying to make things harder than normal.

                    Comment

                    • ruben
                      The New Guy

                      1,000+ Posts
                      • Oct 2012
                      • 1203
                      #6
                      Re: MX2610 polished grooves on mag roller

                      I have seen this a few times, most of the time it was accompanied by metal shards, most likely from the mag roller itself.

                        Comment

                        Previous template Next
                        Working...