[Error Code] Sharp MX2614 giving F2-77

[mynameis]

Good morning.

After i changed the toner cartridge chip for magenta, the machine gave F2-77. Ok, so i switched back to the original Sharp Chip (which was not empty..) but the error code persits.
Any chance i can clear this error?
Connectors of the CRUM and the CRUM itself are both in original position, i did not bend or break something. Machine has 200 prints.

Edit: I just realized that F2-77 is actually an error for yellow. But i switched magenta..

[Leebs14]

Re: Sharp MX2614 giving F2-77

It's worth just taking the yellow/magenta toners out and giving them a good shake. Restart the machine and wait for it to ask for the toners then put them back in.


Sent from my iPhone using Tapatalk