MX M354N(seems to be the week for these machines)

[cucuklotz]

Hi
On older Sharp models you were able to enter simulation mode and manual check and activate all the sensors. I cant find this procedure for this machine any where in the service manual.Does anyone know how to do this on this model
Thanks Andy

[SwisSeV]

Re: MX M354N(seems to be the week for these machines)

# * C *

Sim 2,3 and 4 cover the sensors in the ADF, Finisher and Desk

sorry for the multiple edits, I'm decaffeinated today

[cucuklotz]

Re: MX M354N(seems to be the week for these machines)

Hi
I know how to enter the service mode.I CANT FIND THE MODE TO MANUAL CHECK SENSOR STATUS
Thanks Andy

[cucuklotz]

Re: MX M354N(seems to be the week for these machines)

Hi
Thanks for update
Andy

[igi]

Re: MX M354N(seems to be the week for these machines)

30 1 Used to check the operations of the sensors and the detectors in other than the paper feed section and thecontrol circuits.2 Used to check the operations of the sensors and the detectors in the paper feed section and the control
still same as others