[Misc] MX-2310U - Network card does not wake up after device goes to sleep

[Shozza]

Hi all, long time follower first time poster.

I have a customer who's machine loses it's network connectivity when it goes to sleep, am I right in thinking this is just NIC power save mode. Sim 66-1 Switch 92 / Data 7 to 0 to disable?

Any input greatly appreciated, the machine has to be manually powered off/on to reconnect to the network(/wake the network card up?)

Thanks

Paul

[SwisSeV]

Re: MX-2310U - Network card does not wake up after device goes to sleep

That should stop the FX-11 from going to low power when the machine enters sleep mode. That shouldn't be causing the problem, but that may bypass it. It's worth a shot. The problem is the expansion kit isn't waking up, not that it enters low power.

Do you have the latest firmware?