MX2600n Icum:ROM UNUSUAL

[thomfish]

Hello

I have 3xMX2600n which came with removed HDD. Actually I found all HDDs in a Cabinet so I installed them but it looks like machines need firmware update as it displays IcuM:ROM UNUSUAL message.
Do I need emergency firmware, normal firmware or both?
Can I install any HDD or it has to be specify one for the copier (like in old canons machines)?

I hope any experienced engineers can help me.

Tom

[thomfish]

Re: MX2600n Icum:ROM UNUSUAL

Updating F/W solved the problem.

One machine displays E7-03 so it means that HDD need to be replaced.
Does anybody can share emergency f/w please?
Can I install any 80GB HDD drive on the machine?

[nottoosharp]

Re: MX2600n Icum:ROM UNUSUAL

You can get firmware from sharp indc


Sent from my iPhone using Tapatalk

[sharpcopy]

Re: MX2600n Icum:ROM UNUSUAL

Tom
I have the same problems would you be able to help me with this?
Thanks
Eric

[ZOOTECH]

Re: MX2600n Icum:ROM UNUSUAL

Tom
I have the same problems would you be able to help me with this?
Thanks
Eric

Check which firmware you need- DSK or non-DSK.

[sharpcopy]

Re: MX2600n Icum:ROM UNUSUAL

Thanks Tom
cant get into sim 26 to find out if they got that option......just got a grey screen, any suggestions to get that info before i install firmware updates, i know there different firm updates for non data security and security data
thanks
eric

[sharpcopy]

Re: MX2600n Icum:ROM UNUSUAL

Check which firmware you need- DSK or non-DSK.

Thanks ZOOTECH
cant get into sim 26 to find out if they got that option......just got a grey screen, any suggestions to get that info before i install firmware updates, i know there different firm updates for non data security and security data
thanks
eric

[repn1999]

Re: MX2600n Icum:ROM UNUSUAL

You can look at the firmware chips on the mfp board to determine if it has a data security kit or not. If it does the chips will say something beginning with FR-33u or something like that before boot and main. I can get the firmware for you. Also you can use pretty much any hard drive in them if it's at least the size of the original type or larger. You will need to basically em update the machine with the new hard drive and firmware on a USB. That will fix it. If you need a step by step I can give it to you

[sharpcopy]

Re: MX2600n Icum:ROM UNUSUAL

Repn1999....thanks so much, step by step would be great!! and yes on the firmware I can get it from from sharp, I never did this and don't want to mess up the machine, you can email or pm my email is Sharpcopy@yahoo.com, and thanks again!!

[sharpcopy]

Re: MX2600n Icum:ROM UNUSUAL

Repn1999
It's non-DSK

[repn1999]

Re: MX2600n Icum:ROM UNUSUAL

Here you go. Pay close attention to the renaming of the firmware file.



Environment necessary for the emergency update]
1) The MFP with the HDD where the firmware is rewritten
2) The USB memory which stores the firmware for the emer-
gency upgrade.
File name: emupdate_p2.sfu
* The firmware must be stored in the root folder of the USB
memory.
[Emergency update procedures]
1) Insert the USB memory which stores the firmware for the
emergency update into the USB port.
2) Turn on the main power.
The firmware for the emergency update in the USB memory is
automatically recognized to start reading the USB memory.
It takes about 1 minute, and the booting animation is displayed
during this period.
3) Check to confirm that "EmergencyUpdateMode" is displayed
on the panel.
After that, the process is automatically executed.

[sharpcopy]

Re: MX2600n Icum:ROM UNUSUAL

Thank you so much.....renaming of the firmware file took me for a loop....thanks again I really appreciate

[mojtabamrt]

Re: MX2600n Icum:ROM UNUSUAL

hi guys
i have same problem to sharp mx-2301n
not ready to print
in display write a message : Version Check IcuM:ROM UNUSUAL
pls help me soon guys
thanks alot
good job
mojtabamrt

[Phil B.]

Re: MX2600n Icum:ROM UNUSUAL

hi guys
i have same problem to sharp mx-2301n
not ready to print
in display write a message : Version Check IcuM:ROM UNUSUAL
pls help me soon guys
thanks alot
good job
mojtabamrt

hey ..thanks for digging up a 2yr old DEAD THREAD..

and your machine isn't even the same MODEL!

START YOUR OWN DAMN THREAD NEWBIE

AND THEN GO READ THE FORUM RULES FOR CTN!