[Error Code] Sharp mx m314 error

[Victor H]

I had a call to find out this display Error in sharp mx m314 failed to expand ARM 9 prg, any one please help!

[copyguy1]

Re: Sharp mx m314 error

Replace the SD card

[Victor H]

Re: Sharp mx m314 error

Replace the SD card

Thanks for your reply, I have problem getting this SD card may be you can direct me where to find one or assist me how to get them as I am stuck.. Thanks

Regards, Victor

[copyguy1]

Re: Sharp mx m314 error

You can use a good SD card and copy over to the bad one. Only place to get a new one that is programed is from Sharp

[Victor H]

Re: Sharp mx m314 error

You can use a good SD card and copy over to the bad one. Only place to get a new one that is programed is from Sharp

Thanks once again for the reply, I just want to be sure, is a program SD card for MX M354 the same as the one for mx m314
Regards

[sharpest]

Re: Sharp mx m314 error

Can you describe about copy over the SD card, it's because I was testing with SD duplicator software to duplicate good SD card. But both of SD card became corrupted.

You can use a good SD card and copy over to the bad one. Only place to get a new one that is programed is from Sharp