Jam FNS101_S on Finisher MX-FN 22

[Ingranaggio_rotto]

Me again !

Another MX-1054, another problem : Jam FNS101_S on saddle finisher MX-FN 22....
The defect is quite frequent.
I can not understand the cause! ! !
Has it ever happened ????


I attach the picture of how you lock the sheet....

IMG_20161010_142530.jpg


Thank for the help ! ! !

[sharphead]

Re: Jam FNS101_S on Finisher MX-FN 22

what volume is on the machine.

My understanding is these finishers need to get clutches etc when maintenance counters are met.

[MHeon71]

Re: Jam FNS101_S on Finisher MX-FN 22

Is this a new install? I forgot to put a guide on the relay unit and caused the same jam code, because there was a 1.5" gap in paper path between the 2 units.