need to find discontinued part

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Sharptech56
    Trusted Tech

    100+ Posts
    • Feb 2016
    • 100
    #1

    [Electrical] need to find discontinued part

    Hi All
    I have a distorted display on a MX-7040n it seems to be the harness part # DHAi -5055FCPZ but it seems as though
    the part has been discontinued . Is there any way to get one
    Tags: None
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3375
      #2
      Re: need to find discontinued part

      Originally posted by Sharptech56
      Hi All
      I have a distorted display on a MX-7040n it seems to be the harness part # DHAi -5055FCPZ but it seems as though
      the part has been discontinued . Is there any way to get one
      Check the bulletins for an updated part number.
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • fireater
          Repair God? not quite

          250+ Posts
          • Apr 2006
          • 253
          #3
          Re: need to find discontinued part

          Originally posted by Sharptech56
          Hi All
          I have a distorted display on a MX-7040n it seems to be the harness part # DHAi -5055FCPZ but it seems as though
          the part has been discontinued . Is there any way to get one
          It Probably has never been ordered before and is not in the system.. call you Sharp parts rep and ak him to dig in to it. this is still a current model here in Canada so its gotta be available

          ps tried to order it ..good number but sharp canada says zero stock. try ordering again
          I fix copiers ...Well Sorta

            Comment

            • Sharptech56
              Trusted Tech

              100+ Posts
              • Feb 2016
              • 100
              #4
              Re: need to find discontinued part

              Thanks I would be checking bulletins and contacting my rep but I no longer have access to IDNC or a Sharp service rep since my company was taken over by another

                Comment

                Previous template Next
                Working...