Sharp MX2610 Keeps On Trying to Replenishment Toner.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Tech2002
    Trusted Tech

    Site Contributor
    250+ Posts
    • Aug 2008
    • 334
    #1

    [Misc] Sharp MX2610 Keeps On Trying to Replenishment Toner.

    Have a situation where the system keeps wanting to replenish. I checked the Toners, one was low changed it thinking that this would take care of the clients call. Got another note today that it is doing the same as before. The other Toners were 75 to 50%. So they were good.

    I can't say that I have ever had an issue with toner replenishment. I'm not sure if there really is an issue. Am I missing something here? Any suggestions? This has got to be something simple. Thank you.
    Tags: None
    • ZOOTECH
      Senior member of CRS

      Site Contributor
      2,500+ Posts
      • Jul 2007
      • 3374
      #2
      Re: Sharp MX2610 Keeps On Trying to Replenishment Toner.

      Originally posted by Tech2002
      Have a situation where the system keeps wanting to replenish. I checked the Toners, one was low changed it thinking that this would take care of the clients call. Got another note today that it is doing the same as before. The other Toners were 75 to 50%. So they were good.

      I can't say that I have ever had an issue with toner replenishment. I'm not sure if there really is an issue. Am I missing something here? Any suggestions? This has got to be something simple. Thank you.
      Check for toner dusting on MCs: what values does TC 25-1 show when toners removed?
      "You can't trust your eyes, if your mind is out of focus" --

        Comment

        • Tech2002
          Trusted Tech

          Site Contributor
          250+ Posts
          • Aug 2008
          • 334
          #3
          Re: Sharp MX2610 Keeps On Trying to Replenishment Toner.

          Originally posted by ZOOTECH
          Check for toner dusting on MCs: what values does TC 25-1 show when toners removed?
          Not sure of any value yet. I got the second message and haven't been out to the client. I figure I'll be out there tomorrow. Thanks for the input.

            Comment

            Previous template Next
            Working...